Hubs & Assistants / Home Assistant Green

Home Assistant Green

4.5 / 5 • Mis à jour September 2026
Hubs & Assistants

Image illustrative (photo de stock) ; ce n'est pas le produit exact.

Open Source, Locally Hosted

Home Assistant is an open-source smart home platform that runs on your own hardware, integrates with thousands of devices regardless of manufacturer, and stores everything locally.

Historically running it meant installing it on a computer or a single-board computer yourself. Green is that platform as a finished appliance: plug in power and Ethernet and it runs.

The proposition is different from any commercial hub. There is no company whose service can shut down, no subscription, no cloud dependency, and no device support decided by a manufacturer's commercial interests.

Integration Breadth Is Unmatched

It integrates with an enormous range of devices and services, including many that no commercial hub supports and some that manufacturers actively prefer you did not control independently.

That breadth is the practical reason people choose it. A house with devices from eight manufacturers, several of them obscure, will very likely find all of them supported.

It also integrates non-device data — energy tariffs, weather, transport, calendars — which enables automations that no device-focused hub can express at all.

The Learning Curve Is Real

This is genuinely more involved than a commercial hub. Setting up integrations, building dashboards and writing automations all take time and reading, and the documentation, while good, is community documentation.

The reward is proportional: a system that does exactly what you specify rather than what a manufacturer anticipated. The cost is evenings, particularly at the start.

Anyone who wants to plug something in and have a working smart home in twenty minutes will be frustrated. Anyone willing to invest a weekend will end up with something no commercial system matches.

Hardware, Radios And Practicalities

Green has no built-in Zigbee, Z-Wave or Thread radio, so those need a USB adapter, which is cheap and an extra purchase to plan for rather than a surprise after delivery.

It uses wired Ethernet, which is the right way to connect the core of a smart home and removes a class of intermittent problems.

Because everything runs locally on hardware you own, backups matter. Configuring automatic backups to another location early is the thing people wish they had done when a memory card eventually fails.

Who It Suits

This suits somebody who wants a smart home they own outright, with no subscription and no dependence on any company continuing to operate, and who is willing to learn a real system.

It suits less well anyone wanting a quick setup, or anyone who would find troubleshooting through community forums unappealing rather than normal.

It suits particularly well a house with devices from many manufacturers, or with older equipment no commercial hub supports, where breadth of integration is the deciding factor.

The Verdict

The most capable smart home platform there is, as a plug-in appliance: unmatched integration breadth, everything local, no subscription, and nothing that can be discontinued out from under you.

It has a genuine learning curve, needs a USB radio adapter for Zigbee or Z-Wave, and troubleshooting means community forums.

Buy the USB radio adapter with it and set up automatic backups on day one — those are the two things people wish they had done immediately.

En un coup d'œil

Avantages

  • Unmatched integration breadth across manufacturers and services
  • Everything runs locally; no subscription or cloud dependency
  • Nothing can be discontinued out from under you
  • Integrates non-device data for automations no hub can express

Inconvénients

  • Genuine learning curve; not a twenty-minute setup
  • No built-in Zigbee, Z-Wave or Thread radio
  • Troubleshooting means community forums and documentation
  • Backups are your responsibility

Questions fréquemment posées

How hard is it really?

Harder than a commercial hub — integrations, dashboards and automations all take reading and time, and support is community documentation. Plan a weekend rather than twenty minutes, and the result is a system no commercial platform matches.

What do I need to buy alongside it?

A USB Zigbee or Z-Wave adapter if you have those devices, since Green has no built-in radio. It is cheap, and better planned for now than discovered after delivery.

What happens if the hardware fails?

You restore a backup, which is why configuring automatic backups to another location on day one matters. Everything runs locally on hardware you own, and that means the backup responsibility is yours rather than a company's.

Spécifications

PlatformHome Assistant, open source
HostingLocal, on owned hardware
SubscriptionNone
IntegrationsThousands, cross-manufacturer
RadiosNone built in; USB adapter needed
ConnectionWired Ethernet
BackupsUser configured
Setup effortA weekend, realistically

Résumé

The most capable platform there is, as an appliance: local, unsubscribed, and unmatched for integration. Buy a USB radio and set up backups on day one.

Vérifier le prix sur Amazon